Duckiebot Assembly Tips and Mods Front page › Forums › Technical › Duckiebot assembly › Duckiebot Assembly Tips and Mods Tagged: cable management, improper fit, power cables, securing battery, soldering This topic contains 2 replies, has 3 voices, and was last updated by futurenowx 2 years, 7 months ago. Viewing 3 posts - 1 through 3 (of 3 total) Author Posts August 10, 2018 at 11:46 pm #23472 Erich ClarkParticipant Hey, all! I published a Medium article with 13 sections of tips and mods I developed when constructing my Duckiebot. You can find it here: https://firstname.lastname@example.org/duckiebot-hardware-tips-and-mods-140012a31f44 Hope this helps someone! September 9, 2018 at 6:08 am #26462 Jacopo TaniModerator Hey Erich, These videos are great, thank you for creating them! I look forward to the same for the upcoming Duckiebot 2018 (DB18) version! December 14, 2018 at 7:37 pm #33035 futurenowxParticipant Dear Erich, thx a lot for your very good introduction, this i quite helpfull. you are always welcome to our meetup Connected Autonomous Driving Stuttgart, DE 993 relaxed passengers This Meetup is for autonomous driving enthusiasts, self-driving car engineers and those who want to create a seamless connected user experience of mobility, information and se… Next Meetup Virtual Race League: DIY Robocars Race #6 – Parking Lot Nerd… Saturday, Nov 7, 2020, 6:00 PM5 Attending Check out this Meetup Group → we are developing autonomous cars on the donkeycar platform. now we will have also some duckie cars 🐤🐦🐤🐦 greetings Alexander Author Posts Viewing 3 posts - 1 through 3 (of 3 total) You must be logged in to reply to this topic.