0

Dear Duckietown community,
I tried burning the SD card (16GB) and it doesn’t work due to low memory space even though I used “–compress” for dts command. I would really appreciate your help on this as I tried multiple times but could not proceed after this point. I copied and pasted the terminal command and messages under the Appendix.
Sincerely,
Michael (Won Sup) Song

Appendix (terminal command and messages)
dts init_sd_card –compress –hostname wonsong94 –linux-username wonsong94 –linux-password Thddnjstjq7104 –country KR
INFO:dts:duckietown-shell 3.0.31
dts : Problems with a command?
:
: Report here: https://github.com/duckietown/duckietown-shell-commands/issues
:
: Troubleshooting:
:
: – If some commands update fail, delete ~/.dt-shell/commands
:
: – To reset the shell to “factory settings”, delete ~/.dt-shell
:
: (Note: you will have to re-configure.)
Duckietown Shell commands version 1.1.1
## Tips and tricks
### Multiple networks
dts init_sd_card –wifi network1:password1,network2:password2 –country US
### Steps
Without arguments the script performs the steps:
flash
expand
mount
setup
unmount
You can use –steps to run only some of those:
dts init_sd_card –steps expand,mount
DEBUG:dts:Checking docker environment for user wonsong94
DEBUG:dts:Found ‘wget’ at /usr/bin/wget
DEBUG:dts:Found ‘tar’ at /bin/tar
DEBUG:dts:Found ‘udisksctl’ at /usr/bin/udisksctl
DEBUG:dts:Found ‘docker’ at /usr/bin/docker
DEBUG:dts:Found ‘base64’ at /usr/bin/base64
DEBUG:dts:Found ‘gzip’ at /bin/gzip
DEBUG:dts:Found ‘udevadm’ at /sbin/udevadm
DEBUG:dts:Found ‘lsblk’ at /bin/lsblk
INFO:dts:Please type the device with your SD card. Please be careful to pick the right device and to include ‘/dev/’. Here’s a list of the devices on your system:
Running /bin/bash /home/wonsong94/.dt-shell/commands/init_sd_card/list_disks.sh
NAME TYPE SIZE VENDOR
/dev/sda disk 3.7T ATA
/dev/sdb disk 931.5G ATA
/dev/sdc disk 14.9G Generic
Done!
Type the name of your device (include the ‘/dev’ part): /dev/sdc
Running /bin/bash /home/wonsong94/.dt-shell/commands/init_sd_card/init_sd_card2.sh
64-bit OS detected…
Prior etcher-cli install detected at /tmp/duckietown/etcher-cli, skipping…
HypriotOS image was previously downloaded to /tmp/duckietown/hypriotos-rpi-v1.9.0.img.zip, skipping…
Flashing Hypriot image /tmp/duckietown/hypriotos-rpi-v1.9.0.img.zip to disk /dev/sdc
? This will erase the selected drive. Are you sure? Yes
Flashing: 16.2 MB/s [========================] 100% eta 0s
Validating: 0 B/s [========================] 100% eta 0s
Checksums:
– /dev/sdc: 3ab3f1eb0b0b4e04f9630035ba95f26046b9e104a65dd78f8bb4fa9ed24c0dbebc647e8aa119c0b60bd8ba4d28e739709befbdfceac45ec2416b53c1b0f93423
Flashing Hypriot image succeeded.
Done!
DEBUG:dts:Found ‘parted’ at /sbin/parted
DEBUG:dts:Found ‘resize2fs’ at /sbin/resize2fs
DEBUG:dts:Found ‘df’ at /bin/df
DEBUG:dts:Found ‘umount’ at /bin/umount
INFO:dts:Found device /dev/sdc.
INFO:dts:Current status:
DEBUG:dts:$ [‘sudo’, ‘lsblk’, ‘/dev/sdc’]
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sdc 8:32 1 14.9G 0 disk
├─sdc1 8:33 1 64M 0 part
└─sdc2 8:34 1 935M 0 part
DEBUG:dts:$ [‘sudo’, ‘parted’, ‘-s’, ‘/dev/sdc’, ‘resizepart’, ‘2’, ‘100%’]
DEBUG:dts:$ [‘sudo’, ‘e2fsck’, ‘-f’, ‘/dev/sdc2’]
e2fsck 1.44.1 (24-Mar-2018)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
root: 30693/239360 files (0.2% non-contiguous), 217214/239359 blocks
DEBUG:dts:$ [‘sudo’, ‘resize2fs’, ‘/dev/sdc2’]
resize2fs 1.44.1 (24-Mar-2018)
Resizing the filesystem on /dev/sdc2 to 3872896 (4k) blocks.
The filesystem on /dev/sdc2 is now 3872896 (4k) blocks long.
INFO:dts:Updated status:
DEBUG:dts:$ [‘sudo’, ‘lsblk’, ‘/dev/sdc’]
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sdc 8:32 1 14.9G 0 disk
├─sdc1 8:33 1 64M 0 part
└─sdc2 8:34 1 14.8G 0 part
DEBUG:dts:$ [‘sudo’, ‘udevadm’, ‘trigger’]
DEBUG:dts:$ [‘udisksctl’, ‘mount’, ‘-b’, ‘/dev/disk/by-label/HypriotOS’]
Mounted /dev/sdc1 at /media/wonsong94/HypriotOS.
DEBUG:dts:$ [‘sudo’, ‘udevadm’, ‘trigger’]
DEBUG:dts:$ [‘udisksctl’, ‘mount’, ‘-b’, ‘/dev/disk/by-label/root’]
Mounted /dev/sdc2 at /media/wonsong94/root.
INFO:dts:Adding file /home/wonsong94/.ssh/authorized_keys
INFO:dts:Adding file /home/wonsong94/.dt-shell/config
INFO:dts:Adding file /secrets/tokens/dt1
INFO:dts:Adding file /data/stats/init_sd_card/README.txt
INFO:dts:Adding file /data/stats/init_sd_card/CHANGELOG
INFO:dts:Adding file /data/stats/init_sd_card/version
INFO:dts:Adding file /data/stats/init_sd_card/flash_time
INFO:dts:Adding file /data/stats/init_sd_card/flash_user
INFO:dts:Adding file /data/stats/init_sd_card/flash_machine
INFO:dts:Adding file /data/stats/init_sd_card/parameters/hostname
INFO:dts:Adding file /data/stats/init_sd_card/parameters/linux_username
INFO:dts:Adding file /data/stats/init_sd_card/parameters/stacks_to_run
INFO:dts:Adding file /data/stats/init_sd_card/parameters/stacks_to_load
INFO:dts:Adding file /data/stats/init_sd_card/parameters/compress
INFO:dts:Adding file /data/stats/init_sd_card/parameters/device
INFO:dts:Adding file /data/stats/init_sd_card/parameters/country
INFO:dts:Adding file /data/stats/init_sd_card/parameters/wifi
INFO:dts:Adding file /data/stats/init_sd_card/parameters/ethz_username
INFO:dts:Adding file /data/stats/MAC/README.txt
INFO:dts:Configuration already found in ~/.ssh/config
INFO:dts:Adding file /var/local/wificfg.json
INFO:dts:Adding file /etc/wpa_supplicant/wpa_supplicant.conf
INFO:dts:Stacks to load: [‘DT18_00_basic’, ‘DT18_01_health_stats’, ‘DT18_02_others’, ‘DT18_05_duckiebot_base’]
INFO:dts:Stacks to run: [‘DT18_00_basic’, ‘DT18_01_health_stats’]
DEBUG:dts:$ [‘docker-compose’, ‘-f’, ‘/home/wonsong94/.dt-shell/commands/init_sd_card/stacks/DT18_00_basic.yaml’, ‘config’, ‘–quiet’]
INFO:dts:Adding file /var/local/DT18_00_basic.yaml
DEBUG:dts:$ [‘docker-compose’, ‘-f’, ‘/home/wonsong94/.dt-shell/commands/init_sd_card/stacks/DT18_01_health_stats.yaml’, ‘config’, ‘–quiet’]
INFO:dts:Adding file /var/local/DT18_01_health_stats.yaml
DEBUG:dts:$ [‘docker-compose’, ‘-f’, ‘/home/wonsong94/.dt-shell/commands/init_sd_card/stacks/DT18_02_others.yaml’, ‘config’, ‘–quiet’]
INFO:dts:Adding file /var/local/DT18_02_others.yaml
DEBUG:dts:$ [‘docker-compose’, ‘-f’, ‘/home/wonsong94/.dt-shell/commands/init_sd_card/stacks/DT18_05_duckiebot_base.yaml’, ‘config’, ‘–quiet’]
INFO:dts:Adding file /var/local/DT18_05_duckiebot_base.yaml
INFO:dts:The stacks that are available are: DT18_00_basic, DT18_99_swarm, DT18_01_health_stats, DT18_05_duckiebot_base, DT18_04_camera, DT18_02_others, DT18_03_roscore
INFO:dts:You asked to use [‘DT18_00_basic’, ‘DT18_01_health_stats’, ‘DT18_02_others’, ‘DT18_05_duckiebot_base’]
DEBUG:dts:Checking docker environment for user wonsong94
INFO:dts:Pulling v2tec/watchtower:armhf-latest
DEBUG:dts:$ [‘docker’, ‘pull’, ‘v2tec/watchtower:armhf-latest’]
armhf-latest: Pulling from v2tec/watchtower
Digest: sha256:63abf3fc71a46b8fc46674342766d976e6a97d6c70d2560a0986ec63c1784812
Status: Image is up to date for v2tec/watchtower:armhf-latest
INFO:dts:Pulling portainer/portainer:linux-arm
DEBUG:dts:$ [‘docker’, ‘pull’, ‘portainer/portainer:linux-arm’]
linux-arm: Pulling from portainer/portainer
Digest: sha256:98eac950b26754a304a04ccc2f88990f5ae9bd16f13e2ee038d264ce47dfb6ae
Status: Image is up to date for portainer/portainer:linux-arm
INFO:dts:Using cached file /tmp/duckietown/docker_images/DT18_00_basic-c1fe9102.tar.gz
INFO:dts:Pulling duckietown/rpi-duckiebot-loader:master18
DEBUG:dts:$ [‘docker’, ‘pull’, ‘duckietown/rpi-duckiebot-loader:master18’]
master18: Pulling from duckietown/rpi-duckiebot-loader
Digest: sha256:986708fcac2f9051b17f51c02514279a42089e758b220311ac2de52aa5bad1ec
Status: Image is up to date for duckietown/rpi-duckiebot-loader:master18
INFO:dts:Pulling duckietown/rpi-health:master18
DEBUG:dts:$ [‘docker’, ‘pull’, ‘duckietown/rpi-health:master18’]
master18: Pulling from duckietown/rpi-health
Digest: sha256:f56a664e610813be5e99a05e9afb78629f424323ad825afc0f19f92acf9c3a61
Status: Image is up to date for duckietown/rpi-health:master18
INFO:dts:Pulling duckietown/rpi-simple-server:master18
DEBUG:dts:$ [‘docker’, ‘pull’, ‘duckietown/rpi-simple-server:master18’]
master18: Pulling from duckietown/rpi-simple-server
Digest: sha256:6b6787319cd87b413d5b0a8737f6127c719293c12936c94b5ea3a2d7fd62f6b5
Status: Image is up to date for duckietown/rpi-simple-server:master18
INFO:dts:Pulling duckietown/rpi-duckiebot-online:master18
DEBUG:dts:$ [‘docker’, ‘pull’, ‘duckietown/rpi-duckiebot-online:master18’]
master18: Pulling from duckietown/rpi-duckiebot-online
Digest: sha256:68e5d5b1d6677e8f0110b4f81bb1fb3d47d5658d8de8988108999b7cd8dce3e2
Status: Image is up to date for duckietown/rpi-duckiebot-online:master18
INFO:dts:Saving to /tmp/duckietown/docker_images/DT18_01_health_stats-83f5dbad.tar
DEBUG:dts:$ [‘docker’, ‘save’, ‘-o’, ‘/tmp/duckietown/docker_images/DT18_01_health_stats-83f5dbad.tar’, ‘sha256:fe4f149c3646cacc9bffe3d8ec524b32a212ce48b217871d65f273476b88edbe’, ‘sha256:8b7e75c76852e9db87ab14f12c1cd589e7e752e027084ccd7d4d00190a33fef4’, ‘sha256:2784311b814c9c1016dc7dcec83ec31e98f8566e02c46ebd3abd328dccde0217’, ‘sha256:034be85761ff8f455e69e276b8fc1bdb62e670dbaf41ef1c288b1d9984e97393’]
DEBUG:dts:$ [‘gzip’, ‘-f’, ‘/tmp/duckietown/docker_images/DT18_01_health_stats-83f5dbad.tar’]
INFO:dts:Saved archive /tmp/duckietown/docker_images/DT18_01_health_stats-83f5dbad.tar.gz of size 0.168 GB
INFO:dts:Pulling duckietown/rpi-python-picamera:master18
DEBUG:dts:$ [‘docker’, ‘pull’, ‘duckietown/rpi-python-picamera:master18’]
master18: Pulling from duckietown/rpi-python-picamera
600e408e79d9: Already exists
ec1938821dc4: Already exists
69a401ea1aa4: Already exists
2328aad7e55c: Already exists
8d999689da9c: Already exists
3d8b850cc8be: Already exists
51b5d41c561a: Already exists
99ce34be898f: Already exists
d9fd7d52a369: Already exists
949ab99ed89f: Already exists
f52c7d526a5b: Already exists
4eeadbf1ba82: Already exists
a039a2551778: Already exists
3c0226a7d27d: Already exists
dd914ed72907: Already exists
50e26c8288de: Already exists
3aa16267cd57: Already exists
6958a83a5a69: Already exists
22dbd1b369e6: Already exists
2a5346426c6d: Already exists
6bc8c0ecf0f9: Already exists
de495ef31bf8: Already exists
997b3afbb117: Pull complete
d30bceed5c9c: Pull complete
b0f63be0695b: Pull complete
d4f0c37ae7f7: Pull complete
Digest: sha256:fc83a8af859edfa0ff45da21df77e6a59461bfedde00dea83f325238c42fa5f7
Status: Downloaded newer image for duckietown/rpi-python-picamera:master18
INFO:dts:Saving to /tmp/duckietown/docker_images/DT18_02_others-325d9007.tar
DEBUG:dts:$ [‘docker’, ‘save’, ‘-o’, ‘/tmp/duckietown/docker_images/DT18_02_others-325d9007.tar’, ‘sha256:bbf44b2fa78a1840e1754c4439cfbd5e40712cd8df689842fcc17a233fe05222’]
DEBUG:dts:$ [‘gzip’, ‘-f’, ‘/tmp/duckietown/docker_images/DT18_02_others-325d9007.tar’]
INFO:dts:Saved archive /tmp/duckietown/docker_images/DT18_02_others-325d9007.tar.gz of size 0.085 GB
INFO:dts:Pulling duckietown/rpi-duckiebot-logger:master18
DEBUG:dts:$ [‘docker’, ‘pull’, ‘duckietown/rpi-duckiebot-logger:master18’]
master18: Pulling from duckietown/rpi-duckiebot-logger
Digest: sha256:e66c1c82dfbe7f6b4a5f3532138e6cc6a6a7f8e01ff92cdad35fb5f3a2eec8e0
Status: Image is up to date for duckietown/rpi-duckiebot-logger:master18
INFO:dts:Pulling duckietown/rpi-ros-kinetic-base:master18
DEBUG:dts:$ [‘docker’, ‘pull’, ‘duckietown/rpi-ros-kinetic-base:master18’]
master18: Pulling from duckietown/rpi-ros-kinetic-base
Digest: sha256:79829ac0d362f0fca3a4b8b61194df94fabc97fdf5efcbf2d47eeda203547380
Status: Image is up to date for duckietown/rpi-ros-kinetic-base:master18
INFO:dts:Pulling duckietown/rpi-duckiebot-lanefollowing-demo:master18
DEBUG:dts:$ [‘docker’, ‘pull’, ‘duckietown/rpi-duckiebot-lanefollowing-demo:master18’]
master18: Pulling from duckietown/rpi-duckiebot-lanefollowing-demo
Digest: sha256:fcf9ab80006bf9640576a557eebe6006f3368356a6937d22c932934d728f0883
Status: Image is up to date for duckietown/rpi-duckiebot-lanefollowing-demo:master18
INFO:dts:Pulling duckietown/rpi-duckiebot-joystick-demo:master18
DEBUG:dts:$ [‘docker’, ‘pull’, ‘duckietown/rpi-duckiebot-joystick-demo:master18’]
master18: Pulling from duckietown/rpi-duckiebot-joystick-demo
Digest: sha256:4996b642df61d79fc5487c13de77d43fbbfd89025e6a8c15e25c084d609a28ad
Status: Image is up to date for duckietown/rpi-duckiebot-joystick-demo:master18
INFO:dts:Pulling arm32v7/ros:kinetic-ros-base-xenial
DEBUG:dts:$ [‘docker’, ‘pull’, ‘arm32v7/ros:kinetic-ros-base-xenial’]
kinetic-ros-base-xenial: Pulling from arm32v7/ros
Digest: sha256:b3bb94c248f3bacef87ce7ca7ae50af684f19d92e5c35f12e7bcaa8f9e390cb2
Status: Image is up to date for arm32v7/ros:kinetic-ros-base-xenial
INFO:dts:Pulling duckietown/rpi-ros-kinetic-roscore:master18
DEBUG:dts:$ [‘docker’, ‘pull’, ‘duckietown/rpi-ros-kinetic-roscore:master18’]
master18: Pulling from duckietown/rpi-ros-kinetic-roscore
Digest: sha256:5637a1fa458763e97ada7728bc9d1da52725c1d601f0d1237b998afff18088e7
Status: Image is up to date for duckietown/rpi-ros-kinetic-roscore:master18
INFO:dts:Pulling duckietown/rpi-duckiebot-web_video_server:master18
DEBUG:dts:$ [‘docker’, ‘pull’, ‘duckietown/rpi-duckiebot-web_video_server:master18’]
master18: Pulling from duckietown/rpi-duckiebot-web_video_server
Digest: sha256:e8903b36f1503d48ee713bff9b31fb9874f49afb4dafc0c0d491207cf1fb105f
Status: Image is up to date for duckietown/rpi-duckiebot-web_video_server:master18
INFO:dts:Pulling duckietown/rpi-duckiebot-base:master18
DEBUG:dts:$ [‘docker’, ‘pull’, ‘duckietown/rpi-duckiebot-base:master18’]
master18: Pulling from duckietown/rpi-duckiebot-base
Digest: sha256:559c511e4039f2d4cfa9217e9d034e1531bdb15361c608774c9669ded2dab0f1
Status: Image is up to date for duckietown/rpi-duckiebot-base:master18
INFO:dts:Pulling duckietown/rpi-duckiebot-ros-picam:master18
DEBUG:dts:$ [‘docker’, ‘pull’, ‘duckietown/rpi-duckiebot-ros-picam:master18’]
master18: Pulling from duckietown/rpi-duckiebot-ros-picam
Digest: sha256:3be3334f98de6e9b5565d7321b2e2a9814a8efaecd4e0a3f51f4a81eff676c77
Status: Image is up to date for duckietown/rpi-duckiebot-ros-picam:master18
INFO:dts:Saving to /tmp/duckietown/docker_images/DT18_05_duckiebot_base-3d229f41.tar
DEBUG:dts:$ [‘docker’, ‘save’, ‘-o’, ‘/tmp/duckietown/docker_images/DT18_05_duckiebot_base-3d229f41.tar’, ‘sha256:ef0925ecc01ac4bc71e2786abeb0a2ccd9ca228ea254fb1dba3748ac50ea491c’, ‘sha256:1c4a85b6aedf672421d9fa570abcf39cd4100d3408db5b7a1c54484e5e31edad’, ‘sha256:67f2b67a98b306117051bd36f8883e4121cf1e1641f8604c7fce89403b34ad99’, ‘sha256:b09bf58e021c96261740d429076a2576cfed58ae24e818905497d9c3e334bcf8’, ‘sha256:d28aa3f00b9cbdb7e38cd1dd01f49b5163609e576330c0157ef1048ec7830a5e’, ‘sha256:e02c1b982b9b0b3c34360ceb35aed9996c3070554a97f4de04141dd574b0c89f’, ‘sha256:73becbe372aa3f39943d2ca7112b6e1d1a30899ddb4aafc1df613a6635f43f62’, ‘sha256:1c001d6ff197c800788fcdeb7c54ce5dea5f3b336c8b29c93362ff143886a016’, ‘sha256:e5c9f84e9d7737268521ed2d44ab28755fdf99e70caf38f2ad77b4148575e225’]
Error response from daemon: write /var/lib/docker/tmp/docker-export-359883439/aa166a22fdc97dfc3c6423b9294e5a6b041157c8a51dd8fb36a0fbb4b4781d6c/layer.tar: no space left on device
dts : Traceback (most recent call last):
: File “/home/wonsong94/.local/lib/python2.7/site-packages/dt_shell/__init__.py”, line 38, in cli_main
: cli_main_()
: File “/home/wonsong94/.local/lib/python2.7/site-packages/dt_shell/__init__.py”, line 106, in cli_main_
: shell.onecmd(cmdline)
: File “/usr/lib/python2.7/cmd.py”, line 221, in onecmd
: return func(arg)
: File “/home/wonsong94/.local/lib/python2.7/site-packages/dt_shell/cli.py”, line 409, in <lambda>
: do_command_lam = lambda s, w: do_command(klass, s, w)
: File “/home/wonsong94/.local/lib/python2.7/site-packages/dt_shell/dt_command_abs.py”, line 47, in do_command
: cls.command(shell, args)
: File “/home/wonsong94/.dt-shell/commands/init_sd_card/command.py”, line 191, in command
: step2function[step_name](shell, parsed)
: File “/home/wonsong94/.dt-shell/commands/init_sd_card/command.py”, line 449, in step_setup
: configure_images(parsed, user_data, add_file_local, add_file)
: File “/home/wonsong94/.dt-shell/commands/init_sd_card/command.py”, line 521, in configure_images
: stack2info = save_images(stack2yaml, compress=parsed.compress)
: File “/home/wonsong94/.dt-shell/commands/init_sd_card/command.py”, line 875, in save_images
: _run_cmd(cmd)
: File “/home/wonsong94/.dt-shell/commands/init_sd_card/command.py”, line 722, in _run_cmd
: subprocess.check_call(cmd)
: File “/usr/lib/python2.7/subprocess.py”, line 190, in check_call
: raise CalledProcessError(retcode, cmd)
: CalledProcessError: Command ‘[‘docker’, ‘save’, ‘-o’, ‘/tmp/duckietown/docker_images/DT18_05_duckiebot_base-3d229f41.tar’, ‘sha256:ef0925ecc01ac4bc71e2786abeb0a2ccd9ca228ea254fb1dba3748ac50ea491c’, ‘sha256:1c4a85b6aedf672421d9fa570abcf39cd4100d3408db5b7a1c54484e5e31edad’, ‘sha256:67f2b67a98b306117051bd36f8883e4121cf1e1641f8604c7fce89403b34ad99’, ‘sha256:b09bf58e021c96261740d429076a2576cfed58ae24e818905497d9c3e334bcf8’, ‘sha256:d28aa3f00b9cbdb7e38cd1dd01f49b5163609e576330c0157ef1048ec7830a5e’, ‘sha256:e02c1b982b9b0b3c34360ceb35aed9996c3070554a97f4de04141dd574b0c89f’, ‘sha256:73becbe372aa3f39943d2ca7112b6e1d1a30899ddb4aafc1df613a6635f43f62’, ‘sha256:1c001d6ff197c800788fcdeb7c54ce5dea5f3b336c8b29c93362ff143886a016’, ‘sha256:e5c9f84e9d7737268521ed2d44ab28755fdf99e70caf38f2ad77b4148575e225′]’ returned non-zero exit status 1
dts : Please report that you are using:
:
: duckietown-shell: 3.0.31
: duckietown-shell-commands: 1.1.1
: python: “2.7.15rc1 (default, Nov 12 2018, 14:31:15) n[GCC 7.3.0]”

Posted new comment

Hi Liam,
So 16GB space is from the SD card right? Well, I ordered the kit from Duckietown and the SD card reads 14.9GB. I thought that “dts init_sd_card –compress” would resolve this issue, but it seems like it’s not working. This is the output I get from shell when I’m asked to choose which location I should save the system:

Running /bin/bash /home/wonsong94/.dt-shell/commands/init_sd_card/list_disks.sh NAME TYPE SIZE VENDOR
/dev/sda disk 3.7T ATA
/dev/sdb disk 931.5G ATA
/dev/sdc disk 14.9G Generic

I chose /dev/sdc, which is the SD card.

I see, I checked and surely I think that might be the problem. Let me try allocating more space to the system and see if it works. Thank you!